U.S. optics from American Photonics. Proven 14% beam transmission improvement vs. other optics. High strength gold-plated lenses and aspheric focusing lenses made by II-VI Company, USA.
High focus, high transmittance. The lenses can not only ensure the quality of the CO2 laser cutter machine but also make the optical system run a long time with high efficiency and low cost.
Lower noise, low vibration, running more smoothly, higher torque, higher acceleration, higher precision, better acceleration performance.
The fan can be started by one button. You can control the fan independently.
The wood laser cutter has knife blade and honeycomb platforms for cutting and engraving.
Environmentally friendly and pollution-free laser can be directly used indoors.
Filter large particles in bags.
HEPA filtration larger than 0.03UM particle.
Activated carbon adsorption system.
| Laser - Type | Sealed CO2 laser tube |
| Laser Power | 40w 60w |
| Engraving Area | 600*400mm |
| Worktable | Manual up-down table |
| Whole Machine Size | 950*740*450mm |
| Engraving Speed | 0-48,000mm/min |
| Resetting Positioning Accuracy | ±0.05mm |
| Working Voltage | AC 110-220V ±10%, 50-60Hz |
| Gross Power | <1000w |
| Operating Temperature | 0-45℃ |
| Operating Humidity | 5-95% |
| Minimum Shaping Character | English 1x1mm |
| Graphic Format Supported | BMP, PLT, DST, DXP, and AI |
| Driving System | Stepper |
| Cooling Mode | Water-cooling and protection system |
| Auxiliary Equipments | Exhaust-fans, air-exhaust pipe |
| Controlling Software | DSP control system |
| Compatible Software | CorelDraw AutoCAD Photoshop |
Wood, organic glass, plastic, garments, paper, leather, rubber, and other nonmetal materials.
The CO2 laser cutter has a big working area, to achieve the overall processing of the plate.
MORE
LC1390 CO2 laser cutter is designed specially for non-metallic material, stable performance.
MORE
